Server PUMPING SYSTEM (85883/85885) Bedienungsanleitung PDF herunterladen

 800-558-8722  262-628-5600  [email protected] 7 262-628-5110

Cryovac™ Hose Fitment & Pouch

Cryovac™ Hose Support Pouch

Volume Hose Fitment & Pouch

Volume Hose Support Pouch

Turn Key Clamp

Stock #’s 85883, 85885

Series 05H

REMOTE PUMPING SYSTEM

01883-REVB-021011

Unit installation

ALWAYS CLEAN UNIT THOROUGHLY BEFORE USE. See Cleaning and

Safety Guidelines. For assembly and cleaning of the pump see

included PUMP INSTRUCTION MANUAL.

The installation of this unit should be performed by a qualied

technician.

1 DETERMINE WHERE THIS UNIT CAN BE SECURELY

INSTALLED.

• Pump and pouch support can be installed on a cart or a

cabinet which can support the weight of the condiment

pouch and at a convenient height for operation of the

pump.

• Consider the length of hose and product pouch tment

needed to be attached to the pump, condiment pouch,

and pouch support. (Four different hose kits are

avaliable, see part list on opposite page.)

2 REFERING TO THE CUTOUT TEMPLATE included at the back of

the manual, drill holes for the mounting screws and cutout the

opening for the tower and pump assembly.

3 Secure the tower assembly to the countertop from underneath,

by threading a washer and then a nut to the four 2” threaded

studs supplied with the unit.

4 DROP PUMP ASSEMBLY ONTO PUMP TOWER, secure by centering

over front post and tightening thumb screw at back of tower.

5 THE CRYOVAC POUCH SUPPORT CAN REMAIN FREE STANDING,

placed beneath the pump/tower assembly or hung on spools

included with the pouch support

THE VOLUME POUCH SUPPORT in designed to be freestanding

and placed under pump/tower assembly.

ConneCting Hose to ProdUCt PoUCH

6 Place condiment pouch on a counter top with pouch tment facing

upward.

NOTE: Hose can be connected or disconnected to pump when

installing product pouch.

7 See below for the hose with product pouch connector and product

support pouch that t your condiment pouch.

8 For CRYOVAC™ type product pouch install piercing connector end

of hose into condiment pouch.

9 For VOLUME type product pouch, install the hinged clip connector

to the product pouch tment.

J Lift and place condiment pouch in product pouch support with

pouch/hose connection seated in front slot.

NOTE: Make sure product pouch and hose tment assembly is seated

all the way to bottom of the pouch support slot and directed downward

for best evacuation of product.

K Reconnect hose to pump if it was removed.

ConneCting Hose & ProdUCt PoUCH to PUmP

L SLIDE END OF HOSE ONTO BODY VALVE CONNECTOR ON THE

END OF THE PUMP.

M Bring up Turn Key Clamp and rmly tighten to seal hose to Body

Valve Connector.

N FINAL ASSEMBLED VIEW. Depress head assembly to prime

pump and to Dispense Product.

Unit disassembly

O LOOSEN TURN KEY CLAMP and remove hose from pump.

P LIFT PRODUCT POUCH OUT OF SUPPORT. Remove pouch

connection.

Q REMOVE POUCH CONNECTION END OF HOSE FROM PRODUCT

POUCH.

1 2

REMOTE PUMPING SYSTEM 1
Unit Cleaning 2

Inhaltsverzeichnis

Seite 1 - REMOTE PUMPING SYSTEM

 800-558-8722  262-628-5600  [email protected] 7 262-628-5110Cryovac™ Hose Fitment & PouchCryovac™ Hose Support PouchVolume Hose Fitm

Seite 2 - Unit Cleaning

Unit CleaningNOTE: FOR PUMP DISASSEMBLY AND CLEANING see: PUMP INSTRUCTION MANUAL.CLEANINGBefore rst use and after use daily, disassemble an

Kommentare zu diesen Handbüchern

Keine Kommentare

Server PUMPING SYSTEM (85883/85885) Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Küche Server PUMPING SYSTEM (85883/85885) herunter. Server PUMPING SYSTEM (85883/85885) User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Küche Server PUMPING SYSTEM (85883/85885)