ASSEMBLE PLUNGER:
Apply Food Equipment Lubricant onto Seal and Seal 0-Ring
INSTALL O-RINGS AND ASSEMBLE PUMP BASE:
Apply Food Equipment Lubricant onto all 0-Rings
INSTALL LID AND SECURE WITH
DISCHARGE TUBE NUT AND LOCKING COLLAR:
PUMP ASSEMBLY
BEFORE FIRST USE AND AFTER USE DAILY, DISASSEMBLE
AND CLEAN PUMP.
ASSEMBLE PLUNGER:
INSTALL SEAL O-RING INSIDE SEAL.
• Apply food equipment lubricant on seal o-ring.
INSTALL SEAL ASSEMBLY ONTO PISTON HEAD.
• Apply food equipment lubricant inside seal assembly.
• Flared end of seal assembly should be facing away
from piston head.
INSTALL WASHER ONTO THREADED END OF PISTON.
INSTALL SPRING ONTO THREADED END OF PISTON.
INSTALL HEAD INSERT INSIDE HEAD TUBE.
• Beveled edge of head insert should be facing inside
of head tube.
INSTALL GAGING COLLAR(S), IF NEEDED, AND
LOCKING COLLAR ONTO HEAD TUBE BY SLIDING
THEM ON. POSITION LOCKING COLLAR WITH
THREADING INSIDE LOCKING COLLAR FACING
GAGING COLLAR(S) AND/OR HEAD TUBE FLARED
END.
INSTALL HEAD TUBE ASSEMBLY ONTO PISTON
ASSEMBLY.
INSTALL KNOB ONTO PLUNGER AND ROTATE
CLOCKWISE TO SECURE ONTO THREADED END OF
PISTON.
• Firmly hold head tube towards piston head,
compressing spring, while screwing knob on.
INSTALL O-RINGS AND ASSEMBLE PUMP BASE:
INSTALL SMALL O-RING ONTO DISCHARGE TUBE.
• Apply food equipment lubricant on o-ring.
• Be careful not to damage o-ring while installing
and/or rolling onto discharge tube.
INSTALL LARGE O-RING OR SILICONE GASKET INTO
VALVE BODY.
• Apply food equipment lubricant on o-ring or silicone
gasket.
• ,QVWDOOVLOLFRQHJDVNHWZLWKÀDWVLGHIDFLQJXSDQG
toward cylinder.
INSTALL CYLINDER ONTO VALVE BODY.
• 5RWDWHF\OLQGHUFORFNZLVHDQGSUHVVGRZQ¿UPO\WR
secure into slots on valve body.
INSTALL DISCHARGE TUBE ONTO VALVE BODY.
• Rotate discharge tube clockwise and press down
¿UPO\WRVHFXUHLQWRVORWVRQYDOYHERG\
INSTALL LID AND SECURE WITH
DISCHARGE TUBE NUT AND
LOCKING COLLAR:
INSTALL LID AND DISCHARGE TUBE NUT ONTO
DISCHARGE TUBE.
SECURE LID ONTO PUMP CYLINDER BY ROTATING
DISCHARGE TUBE NUT CLOCKWISE.
INSTALL PLUNGER INTO CYLINDER AND SECURE
TO CYLINDER BY ROTATING LOCKING COLLAR
CLOCKWISE.
SUCTION TUBE
O-RING
OPTIONAL
GAGING
COLLARS
LOCKING
COLLAR
EXAMPLES
VALVE
BODY
STYLE
EXAMPLE
ORIFICED PLUG
EXAMPLE
SUCTION TUBE
INSTALL SILICONE GASKET WITH
FLAT SIDE FACING UP.
(16 Seiten)
(4 Seiten)
(8 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern