Server QOS 8-Bay Betriebsanweisung PDF herunterladen (Seite 117)

Virtual Connect networks 117

Task Action

Designate the network as a private

network

Select the Private Network checkbox.

Enable VLAN tunneling

Select the Enable VLAN Tunneling checkbox.

Set a custom value for preferred link

connection speed or maximum link

connection speed

Select the Advanced Network Settings checkbox. For more information,

see "Advanced Network Settings (on page 119)."

Set the Connection Mode

Select Auto or Failover. For a description of these modes, see "Defining

a network (on page 117)."

Set the LACP Timer

Select the duration for the LACP Timer ("LACP timer configuration" on

page 101).

Use a Shared Uplink Set for the external

port

Select the Use Shared Uplink Set checkbox, and then select the Shared

Uplink Set from the pull-down menu, and then enter the External VLAN

ID. This option is only available if there are Shared Uplink Sets defined.

Add an external uplink port to the

network

Use the cascading menu to select a port.

Change the uplink interface port speed

or disable the port

Click the pull-down box under Speed/Duplex, and then select a setting.

Delete an added port

Click the Delete link in the Action column, or left-click to select the line

item, right-click to display a pull-down menu, and then select Delete.

Add this network to Network Access

Groups

In the Network Access Groups field, begin typing the name of a Network

Access Group that should include this network. When the Network

Access Group name appears, select the name.

Remove this network from Network

Access Groups

In the Network Access Groups field, click the X next to the Network

Access Group name that should not be included.

Save changes

Click Apply.

Cancel without saving changes

Click Cancel.

Defining a network

To define a standalone network:

1. Enter a network name. The network name can be up to 64 characters in length (no spaces).

2. To add a color to the network, select a color from the Color pull-down menu. The network color is used

as a visual identifier for the network within VCM.

3. To add labels to the network, type a label in the Labels field, and then press Enter. Labels are used as

text-based identifiers for the network within VCM. Each label can contain up to 24 characters,

excluding spaces. Each network can have up to 16 labels.

4. Select whether to enable (checked) or disable (unchecked) Smart Link (on page 86).

The checkbox is not available until an uplink is added to the network.

5. Select whether to designate (checked) or not designate (unchecked) this network as a private network

("Private Networks" on page 86).

6. Select whether to enable (checked) or disable (unchecked) VLAN tunneling ("VLAN Tunneling Support"

on page 86).

7. If the network is to be used only internal to the Virtual Connect domain or enclosure, go to step 9 (do not

add any external ports).

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 307 308

Kommentare zu diesen Handbüchern

Keine Kommentare

Server QOS 8-Bay Betriebsanweisung Seite 117

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Elektrische Gehäuse Server QOS 8-Bay